1601 J. P. Hennessy Drive, LaVergne, TN USA 37086-3565 615/641-7533 800/688-6359 www.ammcoats.com Manual Part No.: 85008884 01HENNESSY INDUSTRI
4 • Important: Always read and follow the instructions.Control Panel And Display1-2 Digital readouts, AMOUNT OF UNBALANCE,inside/outside3-4 Digital re
Important: Always read and follow the instructions. • 5Operation Functions MenuSee optimization unbalance sectiondiameterinch/mminch/mmwidthhoodstarta
6 • Important: Always read and follow the instructions.Entering Wheel DimensionsFor clip-on weights, use gauge in the top position A.For adhesive wei
Important: Always read and follow the instructions. • 7Exact Positioning of the Adhesive Weightby Means of the Gauge with Clips- press - Fit the corre
8 • Important: Always read and follow the instructions.Behind Spoke (Hidden Weight)The SPLIT function is used to position the adhesiveweights behind t
Important: Always read and follow the instructions. • 9Match Mount- This function serves to reduce the amount of weightto be added in order to balance
10 • Important: Always read and follow the instructions.Correction ModesFrom the measurement screen, press or button to select the type required. If
Important: Always read and follow the instructions. • 11Manual Dimension Presetting(Use only in particular cases orfor test)c1-c2/STATIC/t1-t3/c1-t3 W
12 • Important: Always read and follow the instructions.c1-t2 Rims- Setting:To go to these functions:- press one of the two buttons for more than 2 se
Important: Always read and follow the instructions. • 13Self-CalibrationFor machine self-calibration proceed as follows:- Fit a wheel with steel rim o
ii • Important: Always read and follow the instructions.
14 • Important: Always read and follow the instructions.Maintenance InstructionsThe balancer requires only minor maintenance tokeep the unit operating
Important: Always read and follow the instructions. • 15Installation InstructionsA factory trained COATS®Service Technician mustperform the install,
16 • Important: Always read and follow the instructions.Floor and Space RequirementsThe balancer must be located on a flat floor of solidconstruction,
Important: Always read and follow the instructions. • 17Hood Installation1. Install plastic bushing on end of hood tube.2. Insert hood tube through ho
85008884 01 06/08 © Copyright 2007 Hennessy Industries and COATS All Rights Reserved Printed in USA
Important: Always read and follow the instructions. • iiiTable of ContentsImportant Safety Instructions . . . . . . . . .iv - viOwner’s Responsibilit
iv • Important: Always read and follow the instructions.IMPORTANT SAFETY INSTRUCTIONSSAVE THESE INSTRUCTIONSREAD ALL INSTRUCTIONS1. Eye and face prote
Important: Always read and follow the instructions. • vOwner’s ResponsibilityTo maintain machine and user safety, the responsibil-ity of the owner is
vi • Important: Always read and follow the instructions.Safety Notices and DecalsFailure to follow danger, warning, and cau-tion instructions may lead
Important: Always read and follow the instructions. • 1Balancing Your First Tire1. Turn the machine OFF then ON(resets machine).Note: The machine wak
2 • Important: Always read and follow the instructions.Principle Operating PartsDo It Now!Now is a good time to fill outthe Owner’s Registry Ca
Important: Always read and follow the instructions. • 3Operating the BalancerWheel MountingSelect the most appropriate mounting method for thewheel yo
Kommentare zu diesen Handbüchern