Coats RC-100 Tire Changer Bedienungsanleitung PDF herunterladen (Seite 13)

Important: Always read and follow operating instructions. • 9

Inflation

DANGER

NEVER exceed tire manufacturer’s recom-

mended air pressure. Tires can explode,

especially if inflated beyond these limits.

Keep hands, arms, and entire body back

from inflating tire. Avoid distraction during

inflation. Check tire pressure frequently to

avoid over inflation. Excessive pressure can

cause tires to explode, causing serious injury

or death to operator or bystander.

1. Make sure both beads are seated. When both

beads are seated, the tire is ready for inflation.

2. Replace the valve core if it was removed.

3. Depress the inflation pedal to position 2 to inflate

the tire. Check tire pressure frequently by removing foot

from pedal and checking the gauge on the tower. Avoid

overinflation.

NOTE: Release air pressure from the tire by pressing

the manual release valve button (inflation hose must be

attached to the valve stem).

Figure 15 - Stand Back During Beat Seat and Inflation

Explosion Hazard

Never exceed 40 PSI while

seating beads. If you use

more than 40 PSI always

use safety cage.

Remember R.I.M.

(see page iv and back cover)

Explosion Hazard

Never inﬂ ate tire

above

manufacturer’s

recommended

pressure after

bead is seated.

DANGERDANGER

Manual Release Valve

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 23 24

Keine Kommentare

Coats RC-100 Tire Changer Bedienungsanleitung Seite 13