Coats Kit 8184572, PAX Adapter Bedienungsanleitung PDF herunterladen

PAX Adapter Installation

Instructions Kit 8184572

COATS, Inc. • Hennessy Industries • 1601 J.P. Hennessy Drive, LaVergne, TN 37086-3565

(800. 688-6359 • (615. 641-7533 • (615. 641-5104 FAX • www.ammcoats.com

Important: Support removal and installation steps

require two people to complete.

Removal Instructions for Left Helpers and

Support

Always disconnect the electrical power sup-

ply, air supply, and bleed the system before

servicing.

1. Disconnect the power and air supplies, and bleed

the air system.

2. Using a 10mm socket, remove the four bolts,

washers, and lock washers from the side panel and

holding the panel, remove and set aside.

3. Using a 7mm socket wrench, disconnect the left-

hand support column air gauge line (ﬁg. 1) from the

pressure limiter. Take these air hose out through the

hole in the back of the chassis.

Figure 1 - Loosen Hose Clamp to Remove Air Gauge Line

4. Remove the drop center tool from the upper left-

hand helper arm and the disk tool from the lower left-

hand helper arm and set aside.

5. With the aid of a per-

son holding the helper

arm, first remove the

upper helper arm bolt and

set the upper arm aside

and then the lower helper

arm bolt and then set the

lower arm aside. (ﬁg. 2)

Figure 2 - Remove Helper Arm Bolts

6. With the aid of a person holding the left-hand sup-

port column, start the removal of the support column

from the chassis using a 17mm socket to remove the 2

bolts holding the support column bracket to the top of

the chassis.

7. Now, remove the 3

remaining bolts holding

the support column to the

back of the chassis (ﬁg. 3)

and then set the support

aside.

Figure 3 - Left-hand Support Column Bolt Removal

8. Using a 10mm socket, remove the inﬂation gauge

from the old left-hand support column and retain for

PAX adapter installation.

Note: If not already installed, it may be necessary to

replace the inﬂation gauge air hose with a longer 64-

inch hose.

PAX Adapter Installation

9. With the aid of a person holding the PAX adapter

support column, use a 17mm socket to mount the sup-

port bracket to the top of the chassis using 2 (M10x25)

bolts and 2 nuts (ﬁg. 4) loosely installed.

Figure 4 - Install PAX Adapter Bracket

10. Next, attach the

storage tray using 3

(M10x25) bolts loosely

installed (ﬁg. 5).

Figure 5 - Install PAX Adapter Storage Tray

CAUTION

Air Gauge Line

Hose Clamp

Pressure

Limiter











1 2

Inhaltsverzeichnis

Seite 1 - Instructions Kit 8184572

Seite 2

Kommentare zu diesen Handbüchern

Keine Kommentare

Coats Kit 8184572, PAX Adapter Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Ausrüstung Coats Kit 8184572, PAX Adapter herunter. COATS Kit 8184572, PAX Adapter User Manual Benutzerhandbuch

Inhaltsverzeichnis

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Ausrüstung Coats Kit 8184572, PAX Adapter