Coats Kit 8142331 Encoder Gapping Tool Bedienungsanleitung PDF herunterladen

Encoder Gapping Tool

Encoder/Sonar Adjustment

Note: Errors 55, 57, or 59 occur when the value read

by the sonar is insufﬁcent to obtain a correct runout

measurement.

1. Make sure the Radial Runout and Lateral Runout

Sonars are aligned correctly.

2. Set Encoder to pulley gap at 0.040".

To make adjustments to the encoder simply remove

the weight tray. Use the Encoder Gapping Tool and

see if it will ﬁt between the encoder PCB and the

encoder wheel. If not remove the bolt holding the

bracket, place a drop of loctite on the threads.

Reposition the encoder assembly and snug down the

bolt with the Encoder Gapping Tool between the PCB

and wheel (0.040").

Note: 1) Do not use a material that could scratch the

encoder decal. 2) To achive a correct adjustment, posi-

tion the Tool behind the encoder PCB; to the right

the holding bracket and not between the bolt heads.

Check your readings again.

3. Go to Self-Test Screen (Green Screen) and verify

that the Encoder is operating correctly and the Sonar

is reading correctly. Use the Sonar check tool (p/n

8114161) or a tape measure and ﬂat card for a target.

XR 1800/1850 Models

Closest Target (Sonar) Readings: 4-inches = 2450 to 2470

Farthest Target (Sonar) Readings: 14-inches = 8100 to 8300

XR 1750 Model

Closest Target (Sonar) Readings: 4-inches = 3840 to 3880

Farthest Target (Sonar) Readings: 14-inches = 12800 to 13200

Note: If the correct readings cannot be obtained then

replace the sonar.

Notched area for

placement between

the encoder PCB and

the encoder wheel.

Encoder

Decal

Encoder

PCB

Gapping

Tool

Closest Target (Sonar) Reading

Farthest Target (Sonar) Reading

Encoder Gapping Tool

Kit #81142331

for XR Series Wheel Balancers

COATS, Inc. • Hennessy Industries • 1601 J.P. Hennessy Drive, LaVergne, TN 37086-3565

(800) 688-6359 • (615) 641-7533 • (615) 641-5104 FAX • www.ammcoats.com

1 2

Encoder Gapping Tool 1
Kit #81142331 1

Inhaltsverzeichnis

Seite 1 - Kit #81142331

Seite 2

4. For XR 1800/1850 software (version 1.06 andhigher) and XR 1750 software (all versions):From the Green Screen press button 2 for 2 secondsand then t

Kommentare zu diesen Handbüchern

Keine Kommentare

Coats Kit 8142331 Encoder Gapping Tool Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Ausrüstung Coats Kit 8142331 Encoder Gapping Tool herunter. COATS Kit 8142331 Encoder Gapping Tool User Manual Benutzerhandbuch

Inhaltsverzeichnis

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Ausrüstung Coats Kit 8142331 Encoder Gapping Tool